Screw-thread sample vials are manufactured from either clear 33 expansion borosilicate clear glass (Type 1, Class A) or 51A amber glass. Vials maintain pH level and eliminate ion leaching. Choose from a urea cap with PTFE foam-backed liner or an open-top, unlined polypropylene cap with PTFE/silicone septa.

Screw-thread sample vials are manufactured from either clear 33 expansion borosilicate clear glass (Type 1, Class A) or 51A amber glass. Vials maintain pH level and eliminate ion leaching. Choose from a urea cap with PTFE foam-backed liner or an open-top, unlined polypropylene cap with PTFE/silicone septa. Vials, caps, and septa are shrink-

Description: Screw-thread sample vials are manufactured from either clear 33 expansion borosilicate clear glass (Type 1, Class A) or 51A amber glass. Vials maintain PH level and eliminate ion leaching. Choose from a polypropylene cap with a PTFE-lined foam backing or a Height: 57 mm; Outer Diameter: 28 mm

Description: Standard opening crimp-top vials have a maximum fill volume of 1.8 ml and are manufactured from inert, 33 expansion borosilicate glass. Certificates ,82028-402CS,82028-404CS,66020-953CS,66020-953PK,89239-006CS,89239-006PK,89239-004CS,89239-004PK

Description: Screw-thread sample vials are manufactured from either clear 33 expansion borosilicate clear glass (Type 1, Class A) or 51A amber glass. Vials maintain PH level and eliminate ion leaching. Choose from a polypropylene cap with a PTFE-lined foam backing or a. Height: 70 mm. Outer Diameter: 21 mm.

This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time. Vials are made from superior quality 33 expansion borosilicate clear (Type 1, Class A) glass, and meet all US, EU and JPN Pharmacopia standards.

Screw-thread sample vials are manufactured from either clear 33 expansion borosilicate clear glass (Type 1, Class A) or 51A amber glass. Vials maintain PH level and eliminate ion leaching. Choose from a polypropylene cap with a PTFE-lined foam backing or a polypropylene cap with a PTFE-lined silicone septa.

Vials are manufactured from 33 expansion borosilicate clear glass (Type 1, Class A). Choose from a polypropylene cap with a PTFE-lined foam backing or a polypropylene cap with PTFE-lined silicone septa. Vials, Caps, and septa are shrink-wrapped separately.

Vial write-on amber snap top 2ml^ Vial Standard write-on amber snap top, wide opening, Glass: TYPE 1, 33 Expansion Borosilicate, Methylated Reduced Surface Activity Glass - mRSA*, Features: Write-on patch (etched), Dimensions: 32mm x 11.6mm, Residual volume: 0.75ml, Capacity: 2ml (nominal volume) This listing is for Pack of 100

Cole-Parmer Datasheets for Vials. Vials are small glass bottles used for storage. • Acheive a leak proof seal without any added pressure during closing These general-purpose, shoulderless vials can be used for liquid scintillation counting, gamma counting, chromatography, sample storage, and culturing.

Screw-thread sample vials are manufactured from either clear 33 expansion borosilicate clear glass (Type 1, Class A) or 51A amber glass. Vials maintain PH level and eliminate ion leaching. Choose from a polypropylene cap with a PTFE-lined foam backing or a polypropylene cap with a PTFE-lined silicone septa.

Borosilicate Glass Tubing. Manufactured of borosilicate glass, this standard wall tubing features great mechanical strength and low coefficient of expansion. Softening point is acheived at 821°C (1509°F) and working point is 1252°C (2885°F). A blast burner over gas can be used to bend smaller sizes and larger sizes must be heated over a

Browse a full range of Vials products from leading suppliers. Shop now at Aijiren Tech Scientific for all of your scientific needs.

Borosilicate Glass 3.3 (196) Natural Kynar (172) Borosilicate Glass (168)

Vials are manufactured from 33 expansion borosilicate clear glass (Type 1, Class A). Choose from a polypropylene cap with a PTFE-lined foam backing or a polypropylene cap with PTFE-lined silicone septa. Vials, Caps, and septa are shrink-wrapped separately.