Comparatively low coefficient of expansion All round good chemicalcompatibility Good resistance to heat shock Higher metal content All amber vials are made from Type 1, Class B-51 or 70 expansion glass Amber glass is to be used for a light sensitive samples; however, if left out in daylight for extended periods of time the amber coloring will

The dimensions for 12x32mm vials are standard among manufacturers, but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high

for the thermal expansion coefficient of silicon are usually less than 0.2 %, and the standard deviation of the curve fit to the data is less than about 0.2 % over most of the temperature range Copper referred to here is of very high purity 99.99% (4N or better) and may be considered oxygen-free

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Aijiren Technology, Varian and Shimadzu.

Color: Clear Vial & Red PTFE septa. Features: LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient. It shows excellent chemical resistance to acidic and neutral solutions, due to its relatively low alkaline content even to alkaline solutions.

11mm Assembled Autosampler Clear Glass Vial Kit. 11mm aluminum crimp top seals have a larger opening to ensure proper needle penetration 2ml, 12X32mm vials are manufactured of Clear, Type 1. Class A or Amber, Type 1 Class B borosilicate glass and include a write-in patch for sample identification. Aluminum seal is crimped onto the vial

Actual Size Drawings of Vials with Fill Volumes 12x32mm Standard Mouth Vials and Inserts 12x32mm Limited Volume Vials (One Piece, No Assembly) 12x32mm WIDE Mouth Vials & Inserts 12x32mm Robotic Autosampler Vials 12x32mm Conical Vials Part Numbers are indicated in Bold. Unless otherwise indicated, vials are clear glass.

Autosampler Vial, 2ml HPLC Vial,9-425 Amber Vial with Blue Screw Caps,Writing Patch,Graduation,White PTFE & Red Silicone Septa Fit for LC Sampler(300 pcs,Brown) B081Y9B5CB $141.12 $82.99 Color: Brown Features: 2ml sample vial are made of high quality borosilicic acid glass,low content of free ions,low coefficient of expansion and very high chemical resistance.It is suitable for

The dimensions for 12x32mm vials are standard between manufacturers but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high recovery vials will have an internal conical bottom.

PTFE Vial Support Sleeve for 7x32mm vials, fits most autosamplers PTFE No 12x32 Flat Bottom – – – WS-5 40 Sleeves adapt 6x32mm vials for use in autosamplers designed for 12x32mm vials. Use sleeve SV-S1 for autosamplers that do not lift the vial from the tray. Use SV-S11A or SV-S11G for autosamplers that move the vial during sampling.

Mar 22, 2020 · Storage vials (4 mL to 40 mL) Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2mL of solutions. The sizes for 12x32mm vials outer dimensions are standard between manufacturers but the length of the neck and screw thread of the 9mm (N9) vial may vary, because 9mm short thread is not industry standardized. 3.

9mm standard 2ml short threaded sample vial(2ml autosampler vial), 2ml, 12×32mm, neck diameter 9mm; red PTFE/white silicone vial gasket, blue perforated polypropylene (PP) vial cap, sample vial has Transparent, amber, transparent with scale writing, and amber with scale writing are available for selection, suitable for various models of autosamplers such as Aijiren, Aijiren Technology, Varian and Shimadzu.

Borosilicate Glass vials are the preferred choice for gas chromatography and liquid chromatography (GC/LC). These vials are generally free of potential contaminants that may interfere with analysis of the sample. Borosilicate glass is made by adding boron trioxide to silica for extreme heat resistance with a very low expansion coefficient

Your sample, the type of vial, cap and septa, the solvent used, and the type of autosampler and detector all contribute to the end quality of your analysis. Choose from our wide selection of vial options to get the right vial for your analysis.

Autosampler Vial, 2ml HPLC Vial,9-425 Amber Vial with Blue Screw Caps,Writing Patch,Graduation,White PTFE & Red Silicone Septa Fit for LC Sampler(300 pcs,Brown) B08Y9B5CB $4.2 $82.99 Color: Brown Features: 2ml sample vial are made of high quality borosilicic acid glass,low content of free ions,low coefficient of expansion and very high chemical resistance.It is suitable for